 |
   |
|
|
This powerful tracked vehicle is designed to save you time and money. With a ground pressure of only 3 PSI it will allow you to move through and work in ditches, hills, swamps, or snow. The RT-03 TranZTrack with standard 33" D Dent tracks will climb 45° slopes and navigate side slopes of 30°. The RT-03 lifts up to 9,525 kg and has a sheave height of 14.3 m to set 27 m utility poles. The standard configuration will dig an 2.4 m hole with a 2 speed automatic kick down 12K auger drive, 50 cm auger with a digging radius of 5.5 m to 7.9 m. Augers up to 80 cm in diameter can be stored automatically. Fine auger drive control provides for anchor setting in all conditions. Continuous rotation is standard. The 175 hp FPT (Fiat Powertrain Technologies) N67 series Turbocharged Diesel engine has 568 ft lb @ 1250 rpm with a standard 90 A alternator (optional 120 A), a block heater, an air intake pre-heater and a secondary fuel filter with water separator. The FPT engine is a Tier 3 rated mechanical fuel injected engine and is distributed by Genrep Ltee in Montreal. This engine permits the TranZTrack digger-derrick to easily transport up to four poles at up to 10.5 km/h or tow a cable trailer behind the vehicle. The UTV International TranZTrack supports a hydraulic tools outlet on the deck as well as a pole puller and a grounding reel. Available options include different types of augers, insulated booms, winches and climate-controlled cabs. UTV International also offers many different models of tracked vehicles for snow, swamps, hills and all kinds of rough terrain. UTV International can also design a special tracked vehicle for your specific needs.
|
|
© InfraStructures - Tous droits réservés - All rights reserved |
UTV International Presents its New 
