 |
   |
|
|
High Level Woodyard Is Moving Up with SENNEBOGEN 840 R-HD Log-Handlers
Most woodyards face periodic challenges in having enough space for their inventory. But in the northern reaches of Alberta, the Tolko sawmill in High Level is challenged by both space and time! According to Gary Ross, the plant manager in High Level, his woodyard has about 3 months to receive and stack 6 months’ worth of log supply for the mill. The rest of the time, the roads into High Level and the grounds in the yard are in no condition to receive trucks. Now, there is a new wrinkle to consider. Mr. Ross, who just recently joined the High Level team, has to implement a significant expansion of the mill’s physical plants, as planned by his predecessor, Dave Gillespie. With new projects under construction, the woodyard is not only under a time constraint, it is also losing space to the mill’s larger footprint. To increase the yard’s capacity, Tolko recently upgraded its equipment fleet with 4 new SENNEBOGEN 840 R-HD log-loaders. At 59,000 kg, these tracked-mounted models are appreciably larger than the SENNEBOGEN models usually seen in log-handling applications. “We needed a larger machine for its lifting capacity and stacking height. This part of the country is on muskeg, so we needed a tracked model to work in the mud in the spring and fall. Our yard is soft most of the year,” explained Peter Fehr, High Level’s maintenance manager. Along with the productivity of the 840s, the management team looks forward to high reliability and simpler maintenance with the new machines. SENNEBOGEN is known for making extensive use of widely available, industry-standard components for routine hydraulic and electrical service. Ready access and low costs for every-day parts are especially valued in a remote location like High Level, an 8-hour drive north of Edmonton. “We’ve been very deliberate with the transition period,” he said. “Even though the new machine may be better, the change to embrace new technology can be hard.” Two of the facilities technicians attended SENNEBOGEN’s Training Center in Stanley, North Carolina, before the first unit arrived in early summer. Strongco, SENNEBOGEN’s distributor in Alberta, then provided a week of on-site instruction to the Tolko operators. Deirdre Prill, the mill’s Log Yard, and Mobile Shop supervisor notes their goal has been to make the transition from old to new equipment as stress-free as possible. “The operators are still getting comfortable with the SENNEBOGENs. We still have our older equipment in service while they get accustomed to the capabilities of the new grapples and longer reach. Then we can gradually move up the targets for our maximum decking height,” she said. The High Level mill is one of the 5 largest lumber producers in Western Canada. The site employs about 320 full-time workers on 3 shifts to produce over 1 million m3 of dimensional lumber from locally sourced spruce, pine, and fir. “As we continue to increase the footprint and the capacity of the mill, we have to maximize the volume we have in the yard, especially as we get close to the end of the season,” said Gary Ross noting the higher decks also mean less travel distance, and less cost, to feed the mill. The planned expansions for the facility include a new bio-fueled thermal energy plant which will reduce its need to purchase natural gas for its drying operations, a new continuous dry kiln, and a new wood pelleting mill. The energy plant will be fueled by using bark, residuals and other by-products from the mill and will be equipped with an electrostatic precipitator to minimize air emissions.
|
© InfraStructures - Tous droits réservés - All rights reserved |
Gary Ross says that his team has been taking its time to adjust to the new equipment.
Partagez sur Facebook / Share on Facebook 
