 |
   |
|
|
 |
BOMAG RS 650-2 Recycler/Stabilizer Features Upgraded Cab, Enhanced Controls for Intuitive, Comfortable Operation
The new BOMAG RS 650-2 Recycler/Stabilizer features a new cab design that cuts operating noise levels inside the cab and improves comfort with an adjustable air-suspension seat. The operator’s station – seat, control lever and display – slides the full width of the cab and rotates 45˚ in either direction to give direct sightline to the machine’s sides. The entire cab rises to a working position for excellent visibility around the machine and lowers to 3,1 m to simplify transport. Upgraded from analogue to full color touchscreen, the new operator display serves as the control center for machine operation. The new 7’’ monitor allows the operator to control rotor depth and speed, gate positioning, emulsion and water injection rates, and quick diagnostics of machine issues. The touchscreen offers quick navigation through operating panels and is the same display as the BOMAG RS 460 for continuity of operation between machines. Increasing safety at the jobsite, the standard enhanced camera system features two camera views to the left and right of the machine as well as two for monitoring the working area to the front and rear for 360˚ coverage. Two additional fore/aft cameras mounted on the rotor housing allow operators to see rotor gate positioning as well as material gradation. Two 10’’ monitors – one for the 360˚ camera system and one for rotor feed – display video feed to the operator. “These are significant upgrades to the RS 650-2 design to improve operator comfort and productivity,” said Randy King, recycler/stabilizer business development manager for BOMAG. “The new controls offer simple, intuitive machine operation, and our new camera system improves visibility on a machine that already offered great visibility.” Powerful, productive and cost-effective
The new RS 650-2’s hydrostatic rotor drive provides continuously variable rotor speeds from 104 to 140 rpm to minimize tool and rotor wear and meet site conditions. Its hydrostatic overload protection system automatically absorbs load shock when an obstruction is encountered to prevent damage to the gearbox, increasing uptime. The new recycler/stabilizer is powered by a 653-hp 8-cylinder engine that meets stringent Tier 4 final emissions standards. The combination of power and traction gives the new RS 650-2 the ability to push an emulsion tanker while pulling a water truck at the same time. Regardless of working or engine speed, the hydraulic travel system delivers impressive torque. Never compromising, BOMAG sets the standard for a quick-change tooth/holder system with the BMS15. A maintenance-free design offers easy handling, and the positive connection between tooth and holder absorbs high mixing forces. The holder quickly bolts on with only 75 ft-lb (102 Nm) torque. High-wear-resistant steel delivers a long service life to lower owning and operating costs.
|
|
|||
© InfraStructures - Tous droits réservés - All rights reserved |
An articulated frame machine, the RS 650-2 delivers a tight steering radius that offers excellent maneuverability in tight spaces. The steerable rear axle enables 4 different modes to aid in working close to structures, so daily production targets can be met. Delivering optimum ground contact, the axle also oscillates up to 15˚ for improved traction. These drive design advantages – along with 4x4 all-wheel drive with anti-slip control (ASC) – allow the machine to excel when completing difficult stabilization projects. 
Partagez sur Facebook / Share on Facebook 
